Vidaxl Lower tract set for BMW

The set is a professional tool for commercial or do-it-yourself use. This set is an ideal tool for installing and removing ball joints, buses and bearings of different BMW models from 1 to 8 series.

The lower tractor set is designed for a long service life and for daily use in the workshop. The set is of industrial quality. All the tools are arranged and stored in a wind -drenched suitcase for easy storage and transport.

• Lower tract set for BMW, 16 parts (see below)
• A tensile rod:
• Length: 225 mm
• Screw size: M12 x 1.5 mm
• Length hexagon key: 8 mm
• Used for operating the quiet bearing
• A spindle nut:
• Wire size: M12 x 1.5 mm
• Length hexagon key: 19 mm
• A compression nut (with axial groove bearing):
• Inner thread size: M12 x 1.5 mm
• Length hexagon key: 24 mm
• A support sleeve (side splits):
• Outdoor diameter: 70 mm
• Inner diameter: 57.5 mm
• A support plate:
• Diameter hole: 12.5 mm
• Outdoor diameter: 70 mm
• Finished with outside diameter: 57 mm
• Height: 12.2 mm
• A pull -out pressure sleeve:
• Inner thread size: M12 x 1.5 mm
• Outdoor diameter: 51 mm
• Inner diameter: 49.7 mm
• Height: 35.2 mm
• An inlet pressure sleeve:
• Inner thread size: M12 x 1.5 mm
• Outdoor diameter: 58 mm
• Inner diameter: 47 mm
• Height: 43.1 mm
• A pull -out distance sleeve:
• Diameter Axgat: 12.5 mm
• Outdoor diameter: 55 mm
• Inner diameter: 46 mm
• Height: 72.3 mm
• A drawing sleeve:
• Diameter hole: 12.5 mm
• Outdoor diameter: 45 mm
• Inner diameter: 36 mm
• Height: 30.1 mm
• An inlet distance shuff:
• Inner thread size: M12 x 1.5 mm
• Outside diameter: 55.1 mm
• Inner diameter: 46.5 mm
• Height: 30.1 mm
• With a lateral phase
• A distance sleeve:
• Diameter hole: 12.5 mm
• Outdoor diameter: 58 mm
• Inner diameter: 47 mm
• Height: 60.5 mm
• A pressure element:
• Inner thread size: M12 x 1.5 mm
• Outdoor diameter: 49.9 mm
• Inner diameter: 32 mm
• Height: 25.3 mm
• A sleeve:
• Diameter Axgat: 12.5 mm
• Outdoor diameter: 65 mm
• Inner diameter: 50.3 mm
• Height: 70.1 mm
• A pull -out printing piece:
• Inner thread size: M12 x 1.5 mm
• Outdoor diameter: 48 mm
• Inner diameter: 32 mm
• Height: 20.1 mm
• An inlet printer:
• Inner thread size: M12 x 1.5 mm
• Outdoor diameter: 65 mm
• Inner diameter: 32 mm
• Height: 20.3 mm
• A draft plate:
• Diameter hole: 12.5 mm
• Outdoor diameter: 50.2 mm
• Finished with outside diameter: 46 mm
• Height: 12.1 mm
• A cast suitcase, different printing pieces, steel and pods are included
• For renewing rubber buses around the suspension
• Suitable for BMW vehicles, 1 series models (for example, E81, E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series Models E60, E61, E63; 6 Series Models, E64, E38; 7 Series models, E65, E66, E67;