Sprayke Sprayke Pomp Rolver for Super Cleaner 1500ml

To combine with our Super Cleaner
For all types of bicycles
Optimize the use of detergent
Makes product dilution possible
Forms an active foam

Instructions
1. Fill the container with the liquid to 0.5 L.
2. Screw the top firmly on the container.
3. Pump until you hear air escape from the valve, always do this earlier
Spraying for maximum results. If the liquid the
The maximum level indicated will be a larger number of strokes
necessary.
4. Spray the foam at a distance of 50 /70 cm from the space to be treated
treated. The foam pier requires no adjustment whatsoever.
5. Make sure you always let the pressure escape through the safety valve
Before screwing the head.
• The user must always request the safety information sheet of the machine from the dealer
chemical composition, which also takes into account the standards
With regard to the removal of any remaining liquids.
• The use of substances that do not meet the standards in
Power is dangerous and endangers the user.
• In the event of damage, the manufacturer is relieved of all liability
Improper use or interference with the product.
Maintenance advice
To get the best performance and sustainable sustainability of the pump, follow:
This advice:
1. After each use of the pump, empty the pressure, clear the reservoir and thoroughly clean (with active carbon, for example
For example) and rinse with clean water. Fill the container with clean water and let the pump turn until the container and
Circuit are empty. Advice: to always make the pump perform optimally, rinse with clean water and
Do not leave the product in the circuit after use. This allows the pores to be clogged in the felt discs in the lance.
2. Do not leave the pump under pressure for a longer period of time.
3. Coat the nozzle, the gaskets and the O-rings at least once a year with vaseline oil. Replace them if necessary.

Warnings
1. Our pressure pump with foam lans is designed to spray a soft foam in water diluted in water; Its use is recommended
In all sites and/or cleaning situations where it is necessary, the cleaning fluid to fix it on the dirt for as long as possible.
1.1. The best performance is obtained if the liquid already contains foam drugs, making a sturdy fixation on the liquid possible
The place to be cleaned reaches the maximum cleaning effect with a clear reduction in the consumption of the product.
1.2. The pump has plastic parts and seals that can be damaged by the use of certain chemicals. The Ventilatistond piece
In POM material, contact with acids, ammonium derivatives and sour salts can deteriorate. You are therefore advised
To perform compatibility tests to verify that it/the product (s) does not harm its materials as a result of incompatibility
The pump is made.
2. Always let the pressure escape with the safety valve before discharging the top.
3. Never leave the pump without supervision if the container is under pressure.
4. For safety reasons you should never open the pump if it is still under pressure.
5. Keep out of the reach of children.
6. Use of the pump entails liability.
7. Never let the pump be exposed to sunlight and make sure it is stored in a frost -free environment. The pump can be used
At temperatures between +5 and +35 ° C.
8. Do not leave the pump near heat sources (for example a heating) because the material used to make the pump does not tolerate high temperatures.